MS-PE 111

Particle size: CaCO3 size: D50 2 ± 0.2 µm; D97 12 ± 2 µm

Application:
Min order quantity:: 100 ton/tons
Supply ability:: 2000 ton/tons per month
Port:: Hai Phong port, Vietnam
Payment terms:: L/C, T/T
Quantity:: ton/tons

✉ Contact supplier

Product detail
Company profile

Short description: Filler masterbatch MS-PE111

Application: Extrusion, injection, film blown molding, highly applicable to HDPE, LLDPE base...

Recommended mix rate: 1% - 40% depend on the processing technology.

Packing: 50bags/ pallet, 20 pallets/ cont 20ft DC (25 tons)

Packaging option 1: 25kgs 3 layer kraft bag unprinted (PE liner- paper- coated PP)

Packaging option 2: 25kgs 3 layer MongSon’s kraft bag printed (PE liner- paper- coated PP)

Packaging option 3: 25kgs 2 layer PP bag printed or non-printed (PE liner- coated PP)

Storage and usage: Keep at dry condition, away from water and moisture environment. Use immediately after opening, best use within 3 month from production date.

SPECIFICATION:

FILLER MASTERBACH MS-PE 111	Results	Test method
LLDPE	13.5 ± 0.5%	ASH TESTER
dispersing additive	4.5 ± 0.5%	ASH TESTER
CaCO₃ content	82.0 ± 0.5%	ASH TESTER
Density	1.85 g/cm³	ASTM D1506
Moisture content	≤ 0.2 %	IR
Particle size	2.2 ± 0.5 mm
Appearance	White oval

CaCO3 Powder’s norms index	Value	Test method
CaCO3	98.5%
MgO	0.4%
Fe2O3	0.01%
Al2O3	0.04%
SiO2	0.01%
Ti O2	0.003%
Appearance	White oval
Whiteness/ Dry	≥ 97%	AATCC
Density (blocks)	2.7 ± 0.1	ASTM D1506
CaCO3 powder particle size	D₅₀ 2 ± 0.2 µm; D₉₇ 12 ± 2 µm	BETTER SIZE
Moisture	≤ 0.2 %	IR
pH	8.5 – 9.5	ASTM D5464
Particle count	400-500 pieces/10g	APT